语言切换

METAPLAS.DEGAS kila Effective degassing for optimum coating adhesion

METAPLAS.DEGAS kila
METAPLAS.DEGAS kila

Why degassing before coating?

The basis for optimum adhesion of PVD coatings is a substrate that is free of dust, dirt, oil, fingerprints and other contaminants not only on the surface, but also inside the material. Therefore, some parts must be degassed at up to 400°C before coating.

The METAPLAS.DEGAS kila degasses substrates under vacuum at high temperatures. This process effectively cleans the substrate, thus enabling the best possible adhesion of the coating, and also shortens the subsequent coating process in the PVD system. Thus, the cleaning and degassing residues will not remain in the PVD system, reducing maintenance and cleaning requirements significantly.

  • Efficiency increase of the PVD coating process by up to 20%
  • Improved coating adhesion and reduced PVD cycle times
  • Precise temperature control
  • Easy handling and operation
  • Energy-efficient system
  • Minimal cleaning effort due to easily removable protective shield sheets

Why METAPLAS.DEGAS kila

Magnetic turbo pump and gate valve on chamber top No maintenance required
Control of substrate temperature by thermocouples Prevents the substrate from overheating
Industrial PC, Windows-based, with remote access Quick troubleshooting
Quick cooling by external heat exchanger integrated on same frame (option) Compact design and faster degassing cycles
Big front door and heavy duty design Easy loading and unloading of up to 700 kg using a forklift
Four (4) level racks available with up to 125 kg load each Load components of different shapes and size
Fast heating up to 450° Reduces cycle times and energy consumption
Energy efficient concept with liner shields inside the chamber Enables easy cleaning

© Copyright 2024 OC Oerlikon Management AG

回到顶部 keyboard_arrow_up

keyboard_arrow_up