Choose your country / language

oerlikon.com

Beyond Surfaces #2 - Technology & Innovation

What does Passion have to do with Technology? Find out in the second issue of our customer magazine!

Beyond Surfaces #2 - Technology & Innovation

In this issue of BEYOND SURFACES we put the focus on ‘Technology & Innovation’. The staff at Oerlikon Balzers and Oerlikon Metco are constantly at work every day to develop new technologies and solutions for our customers, so their needs can be met. Let us show you where this passion comes from and how we implement it in market-oriented innovations.

How research and industry collaborate to develop future coating technologies; how intelligent coating solutions make racing cars faster; how we helped to develop a heat treatment solution for one of the world’s biggest forging presses – let us surprise you with fascinating stories on how we and our customers bring Surface Solutions to life!

Flip through the magazine

Formula Student

Silverstone, Hockenheim, Spielberg. Roaring engines, fast cars, hot asphalt. The nerves of drivers in the paddock are strung taut as the last fine tuning is carried out on their cars. What’s at stake are points – and honour. Because, even if it sounds and feels like Formula 1, the prize money at the Formula Student is the experience of putting theoretical knowledge from the lecture hall into practice. And having a blast doing it. Oerlikon Balzers and Oerlikon Metco are at the track too.

At the beginning of the 80s, the Society of Automotive Engineers in the USA founded the Formula SAE, a university competition. Just shy of two decades later, the idea arrived in Europe as the Formula Student. Today, nine competitions are driven in different countries throughout the world and the number of participating racing teams is rising steadily.

The participating student teams conceive, design, and construct a formula racing car over the course of one year with which they compete against each other in various events before a jury of specialists from motorsport and the automotive industry. The winner, however, is not the team with the fastest car, but the one which attains the highest point score in a series of disciplines. In static (engineering design, cost analysis and business plan presentation) and dynamic disciplines (acceleration and long-distance tests, autocross, figure 8s and energy efficiency), a maximum of 1’000 points is possible. “That’s why our team doesn’t just have engineers, but also students studying business administration or marketing. The task that has been posed is to build a prototype for a fictional small series of cars, and that means we need more than just technology. We also need a business plan and must attract investors for our idea,” comments Francesco Salerno, spokesperson for the racing team from the University of Stuttgart, Germany (Rennteam Uni Stuttgart), explaining the Formula Student concept

SUMEBore scores thanks to reduced friction

SUMEBore scores thanks to reduced friction

The world ranking currently lists over 500 SAE and Formula Student teams. The University of Stuttgart team is among the top ten and at the end of May was even able to take first place in the Formula SAE in Michigan, thereby claiming the victory in the unofficial world championship. Peter Ernst, Head of SUMEBore Technology at Oerlikon Metco, is especially pleased at this: “For several years now, we have sponsored the racing team from the University of Stuttgart with our SUMEBore technology, so of course we cheer them on during every competition«

The SUMEBore coatings on the cylinder bore surfaces in the engine’s interior reduce friction and thus increase engine power. At the same time, they reduce oil and fuel consumption as well as wear and increase the corrosion resistance. “Thanks to SUMEBore, we achieve a lower specific consumption over nearly the entire engine speed range. That’s very important for us because for the ‘Efficiency’ discipline, the consumption is calculated for the 22 kilometre distance race of the endurance competition and the team with the lowest consumption wins 100 of the possible 1’000 points. Low consumption is also of special importance for us because with our four-cylinder engine, we naturally have a higher consumption level then teams with a one-cylinder engine,” explains Francesco Salerno.

In racing, commercial vehicles, passenger cars and motorcycles

The systems for the application of the SUMEBore coatings are based on atmospheric plasma spraying (APS). The coating is carried out by means of a plasma torch which is rotated using the RotaPlasma system. “It basically works like this: The coating powder is introduced into a hot plasma. The powder particles melt forming droplets which are applied uniformly to the inside of the cylinder by means of the rotational movement of the plasma torch and the acceleration of the plasma gas, thus creating the coating,” explains Peter Ernst, summarizing the highly complex process. SUMEBore has not only been used for years in racing: HGV manufacturer, Scania, relies on the SUMEBore technology for virtually all of their engines; the Volkswagen Group uses it, for example, in their EA211 four-cylinder engine which is manufactured in large numbers every year; SUMEBore is also used in the new Porsche 918 Spyder (see BEYOND SURFACES 1/2016).

Friction concept with BALINIT DLC

The Coburg Automobile Team, or CAT, from the Coburg University of Applied Sciences, Germany, also depends on SUMEBore. “We asked ourselves the question, What kind of performance could we get from a series engine? In our case, that’s a Yamaha R6 which has been a faithful part of our team for years. We have developed a friction/performance concept and in Oerlikon Metco, we have found our sponsoring partner. But we were sure of one thing: that our engine offered even more potential. Then Oerlikon Balzers gave us the opportunity to coat individual components with BALINIT DLC STAR,” says Thomas Schnurr, power train team leader for CAT, looking back at the beginning of the season.

Sascha Hessel, Head of Precision Components at Oerlikon Balzers, Germany, explains: “We support several German university teams with our coatings. For CAT, we coated the piston pins, bucket tappets and camshaft of the new car with BALINIT DLC STAR. We get regular feedback from the team as to how the system is developing. That represents valuable data for us.«

Lower consumption + lower weight = more points

BALINIT DLC STAR, a modified diamond-like carbon coating, exhibits outstanding tribological performance and is employed by automobile manufacturers for the components in diesel injection systems and the engine parts which are subjected to the greatest loading. A ductile (elastic) metal-based coating of chromium nitride provides the necessary hardness and with its high load capacity, it supports the superimposed tribological carbon coating.

»We expected our friction/performance concept to generally provide more power and less consumption, which represents an important aspect in the ‘Endurance’ discipline: With lower consumption, less weight needs to be taken along and that means more points for us. We were then also able to validate significant benefits resulting from our friction/performance concept in terms of fuel consumption, oil consumption and engine running,” summarizes Thomas Schnurr.

Outstanding results achieved

Outstanding results achieved

After a brilliant season, both teams have good reason to be satisfied: The Stuttgart racing team was able to win four of five races, which put them at the top of the ranking after all of the races in Europe were completed. The Coburg Automobile Team was also able to finish the season with one win at the Formula SAE event in Italy, putting them in sixth place in the overall ranking.

Contact

Petra Ammann

Petra Ammann

Head of Communications Oerlikon Balzers
Contact

Oerlikon Balzers Coating Benelux NV; Nijverheidslaan 5470, 3800 Sint-Truiden, Belgium

© Copyright 2024 OC Oerlikon Management AG

Back to top keyboard_arrow_up

keyboard_arrow_up