Choose your country / language
Argentina
Brazil
Canada
Mexico
USA
Austria
Belgium
Czech Republic
Finland
France
Germany
Hungary
Italy
Luxembourg
Netherlands
Poland
Portugal
Romania
Slovakia
Turkey
United Kingdom
China
India
Indonesia
Japan
Korea
Malaysia
Philippines
Singapore
Vietnam
열정과 기술이 만나면 어떤 일이 가능해질까요? 고객 매거진 두 번째 호에서 알아보십시오!
BEYOND SURFACES의 이번 호에서는 ‘기술과 혁신’에 대해 집중 조명합니다. 올리콘발저스와 올리콘메트코의 직원들은 고객의 니즈를 충족시킬 수 있는 신기술과 새로운 솔루션 개발을 위해 끊임없이 노력하고 있습니다. 이러한 열정과 노력이 어디서 비롯되고, 시장 지향적 혁신에 어떻게 적용되고 있는지 살펴 보겠습니다.
미래의 코팅 기술을 개발하기 위한 학계와 산업계의 협력, 레이싱 카 속도를 높이기 위한 지능형 코팅 솔루션의 역할, 세계에서 가장 큰 단조 프레스용 열 처리 솔루션 개발을 위한 노력 등 표면 솔루션 개발을 위해 당사와 당사의 고객들이 이루어낸 놀라운 사례들을 확인해 보십시오!
Silverstone, Hockenheim, Spielberg. Roaring engines, fast cars, hot asphalt. The nerves of drivers in the paddock are strung taut as the last fine tuning is carried out on their cars. What’s at stake are points – and honour. Because, even if it sounds and feels like Formula 1, the prize money at the Formula Student is the experience of putting theoretical knowledge from the lecture hall into practice. And having a blast doing it. Oerlikon Balzers and Oerlikon Metco are at the track too.
At the beginning of the 80s, the Society of Automotive Engineers in the USA founded the Formula SAE, a university competition. Just shy of two decades later, the idea arrived in Europe as the Formula Student. Today, nine competitions are driven in different countries throughout the world and the number of participating racing teams is rising steadily.
The participating student teams conceive, design, and construct a formula racing car over the course of one year with which they compete against each other in various events before a jury of specialists from motorsport and the automotive industry. The winner, however, is not the team with the fastest car, but the one which attains the highest point score in a series of disciplines. In static (engineering design, cost analysis and business plan presentation) and dynamic disciplines (acceleration and long-distance tests, autocross, figure 8s and energy efficiency), a maximum of 1’000 points is possible. “That’s why our team doesn’t just have engineers, but also students studying business administration or marketing. The task that has been posed is to build a prototype for a fictional small series of cars, and that means we need more than just technology. We also need a business plan and must attract investors for our idea,” comments Francesco Salerno, spokesperson for the racing team from the University of Stuttgart, Germany (Rennteam Uni Stuttgart), explaining the Formula Student concept
The world ranking currently lists over 500 SAE and Formula Student teams. The University of Stuttgart team is among the top ten and at the end of May was even able to take first place in the Formula SAE in Michigan, thereby claiming the victory in the unofficial world championship. Peter Ernst, Head of SUMEBore Technology at Oerlikon Metco, is especially pleased at this: “For several years now, we have sponsored the racing team from the University of Stuttgart with our SUMEBore technology, so of course we cheer them on during every competition«
The SUMEBore coatings on the cylinder bore surfaces in the engine’s interior reduce friction and thus increase engine power. At the same time, they reduce oil and fuel consumption as well as wear and increase the corrosion resistance. “Thanks to SUMEBore, we achieve a lower specific consumption over nearly the entire engine speed range. That’s very important for us because for the ‘Efficiency’ discipline, the consumption is calculated for the 22 kilometre distance race of the endurance competition and the team with the lowest consumption wins 100 of the possible 1’000 points. Low consumption is also of special importance for us because with our four-cylinder engine, we naturally have a higher consumption level then teams with a one-cylinder engine,” explains Francesco Salerno.
The systems for the application of the SUMEBore coatings are based on atmospheric plasma spraying (APS). The coating is carried out by means of a plasma torch which is rotated using the RotaPlasma system. “It basically works like this: The coating powder is introduced into a hot plasma. The powder particles melt forming droplets which are applied uniformly to the inside of the cylinder by means of the rotational movement of the plasma torch and the acceleration of the plasma gas, thus creating the coating,” explains Peter Ernst, summarizing the highly complex process. SUMEBore has not only been used for years in racing: HGV manufacturer, Scania, relies on the SUMEBore technology for virtually all of their engines; the Volkswagen Group uses it, for example, in their EA211 four-cylinder engine which is manufactured in large numbers every year; SUMEBore is also used in the new Porsche 918 Spyder (see BEYOND SURFACES 1/2016).
The Coburg Automobile Team, or CAT, from the Coburg University of Applied Sciences, Germany, also depends on SUMEBore. “We asked ourselves the question, What kind of performance could we get from a series engine? In our case, that’s a Yamaha R6 which has been a faithful part of our team for years. We have developed a friction/performance concept and in Oerlikon Metco, we have found our sponsoring partner. But we were sure of one thing: that our engine offered even more potential. Then Oerlikon Balzers gave us the opportunity to coat individual components with BALINIT DLC STAR,” says Thomas Schnurr, power train team leader for CAT, looking back at the beginning of the season.
Sascha Hessel, Head of Precision Components at Oerlikon Balzers, Germany, explains: “We support several German university teams with our coatings. For CAT, we coated the piston pins, bucket tappets and camshaft of the new car with BALINIT DLC STAR. We get regular feedback from the team as to how the system is developing. That represents valuable data for us.«
BALINIT DLC STAR, a modified diamond-like carbon coating, exhibits outstanding tribological performance and is employed by automobile manufacturers for the components in diesel injection systems and the engine parts which are subjected to the greatest loading. A ductile (elastic) metal-based coating of chromium nitride provides the necessary hardness and with its high load capacity, it supports the superimposed tribological carbon coating.
»We expected our friction/performance concept to generally provide more power and less consumption, which represents an important aspect in the ‘Endurance’ discipline: With lower consumption, less weight needs to be taken along and that means more points for us. We were then also able to validate significant benefits resulting from our friction/performance concept in terms of fuel consumption, oil consumption and engine running,” summarizes Thomas Schnurr.
After a brilliant season, both teams have good reason to be satisfied: The Stuttgart racing team was able to win four of five races, which put them at the top of the ranking after all of the races in Europe were completed. The Coburg Automobile Team was also able to finish the season with one win at the Formula SAE event in Italy, putting them in sixth place in the overall ranking.
© Copyright 2024 OC Oerlikon Management AG
위로 가기 keyboard_arrow_up
