Choose your country / language

oerlikon.com

Historiska milstolpar

Passion for surface solutions: from our beginnings in 1946 until today

1946 - 2021: Från en idé till världsledande inom teknik.

I 75 år har Oerlikon Balzers stått för banbrytande utveckling och varit världsledande inom beläggningar med tunnfilm. Vi lever vår passion för ytbeläggningar med en unik kombination av hållbar utveckling, innovativ drivkraft, entreprenörsanda och tradition. Detta gynnar både våra kunder och vår miljö - igår, idag och imorgon.

Upptäck 75 år med Oerlikon Balzers

Balzers första hårda PVD-beläggning för verktyg, BALINIT® A, ”föddes” officiellt den 1:e september 1978. Ända sedan dess har Oerlikon Balzers varit en framgångshistoria utan motstycke, både som banbrytare inom beläggningsindustrin och som marknadsledare.

Upptäck 75 år med Oerlikon Balzers

Historiska milstolpar

  1. Med stöd av Prins Franz Josef II och den schweiziske industrimannen Emil Georg Bührle, grundar Professor Max Auwärter företaget Gerätebauanstalt Balzers

  2. BALINIT® C (WC/C)-kolbeläggning presenteras.

  3. Vi gör ett tekniskt genombrott med vår egen patenterade P3e™-teknik som gör det möjligt att belägga med hårda aluminiumoxidskikt vid processtemperaturer klart under 600 °C.

  4. Launch of BALINIT FORMERA / FORMERA PLUS – the coating solution for AHSS forming applications

  5. 75 år med Oerlikon Balzers: ändlös passion för hållbara yttekniker

  6. The "Smooth Revolution" celebrates its anniversary: The first BALIQ coatings were introduced 10 years ago

Tidslinje

Tidslinjefilter

  1. 1940
  2. 1941
  3. 1942
  4. 1943
  5. 1944
  6. 1945
  7. 1946
  8. 1947
  9. 1948
  10. 1949
  11. 1950
  12. 1951
  13. 1952
  14. 1953
  15. 1954
  16. 1955
  17. 1956
  18. 1957
  19. 1958
  20. 1959
  21. 1960
  22. 1961
  23. 1962
  24. 1963
  25. 1964
  26. 1965
  27. 1966
  28. 1967
  29. 1968
  30. 1969
  31. 1970
  32. 1971
  33. 1972
  34. 1973
  35. 1974
  36. 1975
  37. 1976
  38. 1977
  39. 1978
  40. 1979
  41. 1980
  42. 1981
  43. 1982
  44. 1983
  45. 1984
  46. 1985
  47. 1986
  48. 1987
  49. 1988
  50. 1989
  51. 1990
  52. 1991
  53. 1992
  54. 1993
  55. 1994
  56. 1995
  57. 1996
  58. 1997
  59. 1998
  60. 1999
  61. 2000
  62. 2001
  63. 2002
  64. 2003
  65. 2004
  66. 2005
  67. 2006
  68. 2007
  69. 2008
  70. 2009
  71. 2010
  72. 2011
  73. 2012
  74. 2013 2013 2 Evenemang
  75. 2014
  76. 2015 2015 3 Evenemang
  77. 2016 2016 4 Evenemang
  78. 2017 2017 10 Evenemang
  79. 2018 2018 10 Evenemang
  80. 2019 2019 17 Evenemang
  81. 2020 2020 11 Evenemang
  82. 2021 2021 10 Evenemang
  83. 2022 2022 5 Evenemang
  84. 2023 2023 6 Evenemang

Oerlikon erwirbt D-Coat, ein führendes deutsches Technologieunternehmen für Diamantbeschichtung

Oerlikon has acquired D-Coat GmbH, a leading provider of diamond coating technology in Germany. The acquisition expands Oerlikon Balzers’ portfolio of surface treatment technologies, especially for cutting tools applied in the aerospace and automotive industries.

New global Competence Centre for PDC (Plastic Design Components) opens in Bisingen, Germany

Now that the new site has been commissioned, we can offer job coating of plastic injection moulded components for a wide range of industries, including the automotive, consumer goods and household appliance sectors: Metallised plastic coatings based on our ePD technology. As well, the Bisingen Competence Centre will mainly be responsible for the sale of INUBIA coating systems and will provide support for interested customers when designing, setting up and commissioning their own coating facilities. This includes coating and product development, as well as conceptual design of overall production processes.

  • Oerlikon Balzers Competence Centre Bisingen
  • Oerlikon Balzers Competence Centre Bisingen

Oerlikon Balzers delivers first INUBIA B15 to automotive OEM for metallizing an exterior plastic component

High-quality plastic components with high-gloss metallic or matt surfaces and a chrome look are widely used in many industries they offer functional properties and add value to the product. Both the INUBIA B6 and B15 PVD coating systems metallize plastic parts in compliance with REACH without the use of harmful substances. They provide smooth, glossy and scratch-free coatings with high durability and high adhesion on a wide range of polymers.

Airbus qualifies Oerlikon Balzers’ high-end coating system for REACH-compliant component coatings using BALINIT C

Oerlikon Balzers has received qualification from Airbus for its RS 50 coating system, which uses the latest carbon coating technology. The RS 50 is located in Ferrières-en-Brie near Paris, a major Aerospace certified production facility of Oerlikon Balzers. The coating system has been selected and approved by Airbus to secure REACH-compliant PVD coatings with BALINIT C.

Oerlikon Balzers introduces REACH-compliant BALINIT PROTEC coating for industrial gas turbine compressors

Three key factors can impair performance of industrial gas turbine compressors: Solid Particle Erosion (SPE), Water Droplet Erosion (WDE) and corrosion of turbine blades. If undetected, these problems will reduce efficiency and increase costs for operators of power generation plants. BALINIT PROTEC from Oerlikon Balzers, is a REACH-compliant coating specifically developed to make industrial gas turbine compressors significantly more efficient and protect against corrosion and erosion.

Oerlikon Balzers introduces BALIMED TICANA coating for dental abutments and instruments

Oerlikon Balzers has introduced BALIMED TICANA, a PVD coating specifically designed for dental abutments and instruments that meets the stringent requirements of modern dentistry. The innovative coating is the same colour as human gums, which makes it discreet, and it also offers functional properties that help ensure patients get the very best long-term healthcare. The new BALIMED TICANA coating represents another step forward in Oerlikon Balzers’ growth strategy in the medical industry.

Oerlikon Balzers France awarded Nadcap Merit Status

Oerlikon Balzers has received Nadcap Merit Status for all the coating technology used in its customer centre Ferrières-en-Brie, France. The Merit Status means a less frequent audit schedule and is “a sign of trust in the ongoing commitment to quality”, according to the Performance Review Institute, which administers Nadcap.

Oerlikon Balzers opens new application support centre for pre- and post-treatment in Sweden

Oerlikon Balzers has opened a new application support centre in Uppsala, Sweden, for the pre- and post-treatment of cutting tools for the automotive industry. Not only does the new location give customers an information and consulting centre: it also serves as a training centre for new employees and apprentices, so that Oerlikon Balzers staff can keep up-to-date with the latest pre- and post-treatment technology and offer first-class service to customers around the world.

Oerlikon Balzers receives GreenCo Certification and Platinum Quality Excellence Award in India

Oerlikon Balzers India has received GreenCo Silver Certification from the Confederation of Indian Industry (CII) and has been awarded first prize (Platinum) in the Quality Excellence competition organised by the Federation of Indian Chambers of Commerce & Industry (FICCI). These awards recognise Oerlikon Balzers’ contribution towards an ecologically sustainable business model and to improving the customer experience by providing quality goods and services in India.

Oerlikon Balzers recognised by Bosch as Best Supplier of Surface Treatments

Oerlikon Balzers has received the Bosch “Best Supplier of Surface Treatments” award for 2019. The company was recognised for providing excellent quality with its high-end coatings applied to precision components for the world’s leading automotive supplier.

Oerlikon Balzers introduces new BALORA portfolio featuring the next generation of MCrAlY coatings based on PVD Arc technology

Oerlikon Balzers has introduced its new BALORA portfolio of coatings which offers revolutionary properties for applications in high-temperature environments, such as in the aerospace and power generation markets. The first coating from the new portfolio, BALORA PVD MCrAlY, represents the next generation of high-density MCrAlY coatings, which use Oerlikon Balzers’ proven PVD Arc surface and equipment technologies to form an outstanding barrier against oxidation and hot corrosion inside the hot section of turbines.

1 av 11
Kontakta oss

Oerlikon Balzers Coating Sweden AB; Gesällvägen 6, SE-145 63 Norsborg, Sverige

© Copyright 2024 OC Oerlikon Management AG

Tillbaka till början keyboard_arrow_up

keyboard_arrow_up