Choose your country / language

EvoSteam staple fiber process from Oerlikon Neumag bluesign® verified

Neumünster, Germany - 19 November 2023 - The new polyester staple fiber process EvoSteam from Oerlikon Neumag receives the bluesign® test label "bluesign® VERIFIED DATA". For this, the innovative, energy and resource-saving EvoSteam process had to undergo strict data verification. It impressed with savings in energy, water and raw material consumption, as well as a reduction in operating costs (OPEX) and the CO2 footprint.

EvoSteam staple fiber process from Oerlikon Neumag bluesign® verified

Caption 1: The revolutionary new Oerlikon Neumag EvoSteam staple fiber process is bluesign® verified >> Picture download

For sustainable staple fiber production

All relevant process data was compared with the conventional drawing process and analysed. The results are impressive: "I am delighted that, following intensive development work on the new EvoSteam process, we have been able to reduce the total energy consumption for steam and electricity by up to 8%. In addition to reducing production waste by up to 50%, we expect to save around 3.2 million litres of water per year. For the operators of our plants, these are considerable cost savings while at the same time reducing impact on the environment by reducing the CO2 footprint by around 6%," says Dr Friedrich Lennemann, Head of Technology Development at Oerlikon Neumag, summarising the result. By receiving the bluesign® VERIFIED DATA label, Oerlikon Neumag is not only emphasising its commitment to sustainability. All polyester staple fibers produced with the EvoSteam process will actively contribute to the bluesign® SYSTEM in the future.

bluesign® VERIFIED DATA
For the EvoSteam process, Oerlikon Neumag received the bluesign® VERIFIED DATA label for the first time. The label includes the verification of impact data such as water, spinning preparations, thermal and electrical energy as well as the CO2 footprint by means of a plausibility check of the supporting records for the EvoSteam draw line, the central element in the EvoSteam process. The reported data was assessed as 2.1 - fair - in accordance with the defined methodology.

EvoSteam process for sustainable staple fiber production
The EvoSteam process was presented to the global public for the first time at ITMA 2023 in Milan. Visitors to the trade fair spoke of a major development step, as the EvoSteam process dispenses with liquid baths. The function of the immersion bath is assumed by a carefully-coordinated setup of godets and pulsed spray nozzles. With this, the moisture is metered precisely and added according to the needs of the process. This completely dispensing with liquid baths generates significant savings in terms of water, energy and finishes, while also increasing occupational safety and cleanliness at the production line.

For further information, please contact:

André Wissenberg

André Wissenberg

Vice President, Head of Marketing, Corporate Communications and Public Affairs Polymer Processing Solutions Division

Rickey Steele

Marketing, Corporate Communications & Public Affairs Oerlikon Neumag
keyboard_arrow_up